ESH Ramps

With the different ramp sets, consisting of tracks and traverses, the mobile column lifts ESH (mechanical and hydraulical versions) can be modified in a drive-on ramp-lift System. The tracks will be hooked in the traverses, the columns will be moved to the traverses and these will be lifted with the standard fork, which normally lifts at the tyres. Depending on the use of 4 t, 5,5 t or 7,5 t columns, the mobile lift can be adapt in a drive-on ramp-lift with capacities from 12 t to 50 t and ramp length from 7,2 m to 16,4 m. The lifting system is optimally capable for all works which normally are made in pits or on 4-post or scissor lifts. It is only necessary to have a attached floor but there is no fundament essential. The lifting unit is standing safe without any fixing on the floor. Therefore the columns can be used anytime again as a mobile column lift.  Two in one

By using  a axle lifter with 10 or 15 t capacity it is possible to lift the wheels free, therefore also works at the brakes of the lifted vehicle are possible. Based on the low drive on height of only 185 mm it is comfortable to use the lift also for low lying vehicles.

photosaccessoriestechniquefilmdownloads

accessories

• control box for 220 V or 380 V
• axle stand short capacity 3 t
• axle stand long capacity 4 t
• smaller wheel adapter
• wheel fixation device

• capacity: 2500 kg/220 V, 3000 kg/380 V
• lifting height: 900 mm
• lifting time: approx. 60 sec
• weight: 145 kg
• colour: RAL 3020

• product information